NITROUS OXIDE ( nos / n2o ) advice forum

Like the new Welcome banner

LOTS MORE to come ASAP!!!

As you can see we're making the improvements as we have time and as promised, so all is going well.

What we need now is for as many of you guys as possible, to add some reviews of the products to make best use of that additional feature, that we lost when we made the previous site 'upgrade', so please feel free to make your opinions of whatever products you've purchased from us known.

Here's a picture of the new Max Extreme.



It doesn't look any different to the original Max but there are a couple of subtle differences;

1) It has strip connectors at each end rather than a pre-soldered wiring loom - this makes it easier to wire in and easier to remove when requiring an upgrade.

2) The addition of the connectors has resulting in the width being increased by approx. 6mm.

One of the most exceptional new features, is the capability to energise Pulsoids down to as low as, start power levels of just 5 or less percent. This feature also delivers higher frequency operation over the widest possible range, which produces even smoother power delivery.

BTW DO NOT confuse this GENUINE REVOLUTIONARY UNIQUE FEATURE, with the FALSE assertions IMPLIED by other progressive units, as a consequence of them OFFERING IMPOSSIBLY LOW setting options.

More details ASAP.

Hi Trev

I hope you have one sat on the back shelf with my name on it for when I come up within the next 3 weeks

All the best Brett

Certainly do Brett.

Watch the link on the home page www.noswizard.com for Max V2 features list etc.

Hi Trev

I already have, but only about 200 times lol...

I am REALLY looking forward to the Maxx V2 ...


All the best Brett

Is this still there? I don't get a list of features on the home page? Are we getting any closer to an "offical" announcment?

Sam

Slowly but surely Sam.

The picture and brief intro was the first step and I'm still working on the full specification details as and when there's no more pressing matters to deal with.

Every day we get a little closer to having it completed - I PROMISE to have it finished by this time next week.

Features list almost done, just a couple of minor details to add and a general check over and that should be that job done UNTIL WE ADD THE NEXT FEATURE/S!!!!

Should be added to the website by Wednesday with a bit of luck.

How's it coming along trev?

Sam

Just waiting for Ant to proof read the final job and it'll be added to the website and should be done Tuesday/Wednesday.

At last the long awaited features list for the new Max V2 - still a few more to add but this should bridge the gap till we get it completed.

In addition to the following features list many of the existing features have been improved to deliver even better results.

Inputs
Independent AFR input
Independent Gear IP input
0-5V analogue input
0-100 % PWM input to drive the Max as a slave to an ECU for REVO applications

Outputs
2 additional REVO outputs for multiple REVO applications
0-5V analogue output to interface with an ECU and/or a data logger
Dual Mosfet solenoid outputs for higher load applications
6V 10 Amp REVO drive output

Software features
On-Screen push button calibration for; N2O pressure, fuel pressure, voltage, gear input, AFR and 0-5 V input
Dynamic Variable Frequency for a wider PWM range and smoother power delivery(DVF)
AFR Trim log
Quick access push button memory change capability

Hardware Features
Additional protection from interference
Additional heat sinks for higher load capability
On-board electrical connectors instead of attached loom
External USB connection for quick and easy programming

Thanks for the list, sounds great!
Sam

A few more to come and then the WHOLE list (including those that exist from the Max V1), will be available on the website.

We've had a hell of a busy past few months, so finding the time for anything other than dealing with customers has been very difficult.

Hi All

Got my Maxx Extreme Race/Revo V2 Today and its phenomenal, everything Trev has said above and more as expected...

And all working perfectly of course

Will add more to my Annual visit to WON thread later when i have had a bath

All the best Brett

At last!!!!

http://www.noswizard.com/index.php/max- ... 0tilt80ka2

Now 'all' we've got to do is get the instructions updated.

OK here's a more comprehensive features list which gives more details about the features themselves;

http://www.noswizard.com/index.php/max- ... 0tilt80ka2

What I'd appreciate is ANY feedback about any of the features that aren't adequately described, so that I can concentrate my efforts on making those clearer, so all contributions to that effect would be very welcome.

BTW as much as it's nice to get complements about any aspect of my business, I'd rather have criticisms as that makes me aware of any shortcomings I'm unlikely to be aware of, because if I was aware of them they wouldn't exist, so please feel free to post any criticisms you feel appropriate.

PS. I've separated off the original last page of this thread as it took the thread off topic far too much and those posts can now be found here;

viewtopic.php?f=8&t=6193&start=0