Good weekend, improved my pb to 11.88 @ 114.47
bar missed gears
every run on Monday was in the 11's
Did a couple of runs against a Noble, they're not slow but not quick enough against the kitten
Started with just 75bhp on Sunday morning and over the weekend went upto 162bhp (325 n20 jet). The twin pipe set-up seems to have done the trick, after fine tuning the ratio's to around 10.5 afr on the 75bhp jets which worked out to 1.9 with a fuel pressure of 8 psi, the same ratio was perfect all the way to 162bhp and kept the afr at around 10.5 on every step up. I know that's a bit rich, but i like to keep it around there on n2o as the engine is a bit high on cr and i'm not running any retard (i can/will when it's needed though). Data logs, afr's, plugs were all perfect
Grip's a problem now, but then again i've had my MT's for 3 years now....and they were 2nd hand when i got them!. Most of the depth holes are invisible now, so suspect it time for something new. If i'm going to buy new ones, i'm thinking about reducing the wheel diameter to get a taller side wall (keep the same overall diameter), more give, flex, bigger foot print on launch etc???. Also the M+H drag tyres seem to be quite popular as opposed to Mt's. Any thoughts anyone???
Ian