NITROUS OXIDE ( nos / n2o ) advice forum

SHIT STIRRER!!!!

MOI????

NEVER.....

Go Stevie Go Stevie!

But just in case the MR2 wins....Go Moo! Go Moo!

Either way, you wil both be welcome to join us at the pod for the "Mild Bunch" weekend out on the 17th October.


Whatever happens, you have to make sure that we "Have it large" dudes !!

BBQ and beer will be on tap as usual folks

Yup and even with the turbo disconnected - provided I keep my foot in the nitrous runs the engine and it keeps on accelerating to the finish!

Mind you - we've seen what happens when it runs right......... Just check the signature

I indeed aware of the rapids finest hour
And good on ya Steve for it

The unknown quantity is the pink one
It ran a best timed run using a 45shot with a dash speed of 95
The next 2runs were at a 60shot
On what I thought was the best run I got dash speed of 107
Slip said 15.1 @ 87!?!
Allowing for the speedo being off by proven 8% that's a pass at 99mph

LOL @ Moo getting the excusses in early not even run yet


hmmm street cred could be on line hear bro

A hairdresser's car and theoretical numbers eh Tezz

i aint worried, ive got no street cred to start with

ordered these from motorsportworld at 1.30am on the 7th, arrived midday on the 8th
also have discounts on most brake pads and discs, suspension and wheels, infact most of everything
always a great service and very quick delivery

but they are BLUE Moo!

Need them in red!!

pay an extra tenna for the 8.5mm there red
i buy 8mm cuz they still fit in stock wire clips on engine

"there can be only one"

That would be me then!

Oh noooooooooo Steve, you should NOT have mentioned the "Heated Rear Window",
think you just set you're self up for a piss take.
see if anyone bites!

ive been holding back its too easy, i use gloves to keep my hands warm

new grade6 plugs and magnecor leads fitted


heatsinked ignitor in place


adjustable thermostat for engine bay fan fitted, so cooler engine bay


new colour coded stealth buttons fitted


AND! i fixed the wobbly gearknob

i fly off to murcia on monday morning and come back friday afternoon
so ive got 24hrs to build a 13second car

But Moo!!

I've seen the way you drive. You'e got a heavy foot. Amateurs dont use nitrous oxide. YOU'LL BLOW YOURSELF TO PIECES

I just hope that 100 shot doesnt blow the welds on the intake ???

yeah there could be manifold damage, watch out for the hole in the floor!!!

Its just as well I will be IN FRONT

DON'T want no dodgy floor panel held in with crap rivets coming at me!

ANd anyway - how did vin sit in teh passenger side with no floor?

Thats why, as they roll the Toyota out for its maiden run, his girlfriend say's "You ready for this Stumpy"


Anyroad up!!

Tricky should be in good form we hope. I've rewired his Max this lunchtime and it works fine. How many fookin wires can a controller have

And I have just put Stevie's cylinder head in a bag after lapping the vales back in and fitting stronger srpings. I reckon the springs in my Biro are stronger than the Skoda ones Steve

Steve!
I dont know exactly what your lift is. So I measured the old s New by compressing to spring bind while fitted to the head. The new springs bind 1.4mm sooner than the old weak springs.
Two of your exhaust seats had bad pitting. And two of the inlet seats had slight burn marks / pitting on one side. So they took a bit of effort to re seat.

And I've done bugger all to my car. But now I can start. All I really need to do is make up some new brackets to mount the bug catcher. I've already taken off the melted slicks and fitted my old ET Streets.
Jason has fitted an induction kit to the MR2 as well as a chavtastic Zorst

The nitrous kit for the MR2 hasnt arrived from fleay bay yet

It's been a really productive day all round for me getting jobs mopped up. Now I feel a stroll to the corner shop coming on for fags, beer and jelly sweets

Laters Peeps....

fuel pressure gauge fitted


engine bay fan control tested, ignitor heatsink fan working, nos system tested
90% of jobs done, just hope the plane on way back isnt delayed so i can a few hours in

You is well blinging it up aint ya Dude

So Tricky is up for Saturday?

great - should be good.

Need to get the Furby fixed and then we are looking for a good few laffs

- Didnt expect you to rebuild the head Pel - but not going to complain - Thanks

Just need to find the spare head gasket now - got one somewheres............ but £8 from Skoda though.

does anyone have an idea what a system will act like at a 70-80% max pulse?