The X-10 has an INTEGRAL purge port, so all you need to do is remove the blank and fit a suitable connector instead, to connect to the purge solenoid. Then you just need to plumb the outlet from the purge solenoid to somewhere you can see it exiting to atmosphere.
You know when you've purged the pipe adequately when you can see a full plume.
Only purge immediately prior to use, as in most installations the liquid will start to be replaced by gas, as soon as you stop purging.
_________________ Regards
Trev (The WIZARD of NOS)
30 years of nitrous experience and counting!!!!
|