NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
Solenoid Cabling http://nitrous-advice.org/viewtopic.php?f=6&t=7572 |
Page 1 of 1 |
Author: | BagPuss [ Thu Jun 27, 2019 6:21 am ] |
Post subject: | Solenoid Cabling |
What size is the solenoid cabling as this is coming from No.87 off the relay, just want to make sure it's the correct AWG for the job. 20AWG = 11A 16AWG = 22A The cabling from the solenoid looks to be 18AWG which would 18A Thanks Attachment: 20171123_084833.jpg [ 198.18 KiB | Viewed 9748 times ] |
Author: | Turbobox [ Thu Jun 27, 2019 1:40 pm ] |
Post subject: | Re: Solenoid Cabling |
30 and 87 off a relay are for the load and it is sufficient for multiple pulsoids. Pulsoid wiring is very small like 18- 20 AWG as they draw very few amps ( assuming a 150 pulsoid) and often is unnecessary to even use a relay, unless it's for a more complex setup. |
Author: | BagPuss [ Thu Jun 27, 2019 5:25 pm ] |
Post subject: | Re: Solenoid Cabling |
Thanks, just wanted to make sure as the fuse is rated at 20A. I'm keeping the same colour coding as per the drawings as I bought 2 WON Wiring kits. I'll ordered the additional size etc now. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |