NITROUS OXIDE ( nos / n2o ) advice forum

What size is the solenoid cabling as this is coming from No.87 off the relay, just want to make sure it's the correct AWG for the job.

20AWG = 11A
16AWG = 22A

The cabling from the solenoid looks to be 18AWG which would 18A

Thanks

30 and 87 off a relay are for the load and it is sufficient for multiple pulsoids. Pulsoid wiring is very small like 18- 20 AWG as they draw very few amps ( assuming a 150 pulsoid) and often is unnecessary to even use a relay, unless it's for a more complex setup.

Thanks, just wanted to make sure as the fuse is rated at 20A.

I'm keeping the same colour coding as per the drawings as I bought 2 WON Wiring kits.
I'll ordered the additional size etc now.