| NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
| Transducer connections http://nitrous-advice.org/viewtopic.php?f=6&t=7539 |
Page 1 of 1 |
| Author: | DaJagFather [ Wed Nov 29, 2017 9:12 am ] |
| Post subject: | Transducer connections |
I am looking at the nitrous and fuel tranducers and they both require that I choose either a 5mm nylon connection, or 4AN/6AN braided hose connecion. I don;t understand what the additional charge is for? In case of the nitrous transducer, I will place it on the bottle using the threaded end of the transducer. The instructions are not really clear on how to connect the fuel transducer. I assume I would have to use aa fuel T- compression fitting? and if that is true, then why am I being asked to pick from the 4AN, 6AN, or 5mm nylon options??? |
|
| Author: | Turbobox [ Sat Dec 02, 2017 11:53 pm ] |
| Post subject: | Re: Transducer connections |
Many racers use AN fittings for their fuel systems and you can also take off fuel where the solenoid takes fuel from the main system, which is 5mm nylon pipe. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|