NITROUS OXIDE ( nos / n2o ) advice forum
http://nitrous-advice.org/

Max Extreme Wiring Loom (In WoN Shop)
http://nitrous-advice.org/viewtopic.php?f=6&t=7536		 Page 1 of 1
Author:  BagPuss [ Tue Nov 21, 2017 6:37 pm ]
Post subject:  Max Extreme Wiring Loom (In WoN Shop)
Hi all,

In the shop there is the Max Extreme Wiring Loom as mine has been chomped, so would like to make good and use the existing colour coding.

So this is for the latest version of Max Extreme, so V2........is there one available for M Extreme V1? :scratch:

Cheers
Author:  Turbobox [ Tue Nov 21, 2017 7:30 pm ]
Post subject:  Re: Max Extreme Wiring Loom (In WoN Shop)
The Max V1 is soldered onto the board. In order to replace it, it must be sent in for the work in order to keep any kind of warranty.
Author:  BagPuss [ Tue Nov 21, 2017 7:47 pm ]
Post subject:  Re: Max Extreme Wiring Loom (In WoN Shop)
Ok Thanks,

What is the V2 Cable length?
Author:  Turbobox [ Tue Nov 21, 2017 8:14 pm ]
Post subject:  Re: Max Extreme Wiring Loom (In WoN Shop)
To be honest, I don't recall the total length and I haven't a unit in stock anymore to check on that for you.

If you're good with a soldering iron, you can extend the short cables with new cable of the same gauge. It should not affect the warranty because you are not soldering the board directly.
Author:  BagPuss [ Tue Nov 21, 2017 8:49 pm ]
Post subject:  Re: Max Extreme Wiring Loom (In WoN Shop)
Yeah, very good with a soldering iron and some heat shrink. :yes:

Should've added that to my recent order .....Doh! :loser:
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/