Tufty65 wrote:
Noswizard wrote:
Just one question, what is the broken line representing?
That was how the pulsoids were wired as standard with the blue and orange originally from the minimax.
Would the relay I've tried be the cause of the pulsoids to trigger when 1 is connected to 12v then?
It looks that way but I can't say for certain. There doesn't seem to be any reason for the wiring to cause it to happen, to that onlt leaves the SSRs themselves. The only other explanation is that you've burned out the FET and it's permanently giving an output on the blue wire.
You can check that by connecting a power to one of the Pulsoids, powering up the Minimax (but NOT activating it) and then connecting the blue wire to the spare Pulsoid wire. If the Pulsoid activates you have burned out the Minimax FET but if it dosn't activate, it points towards the SSR's not being suitable.