NITROUS OXIDE ( nos / n2o ) advice forum

No need for words here, just watch this test I performed.

The bottle pressure was 850 psi with a 0.010" jet. Imagine how much worse it would have been at higher jetting!

Notice how long it takes for the LIQUID nitrous to reach the nozzle and this is AFTER A FIRST COUPLE OF FIRES TO PURGE THE LINES!!! GARBAGE!!!

BAD NITROUS KIT PERFORMANCE

TYPICALLY PATHETIC and I posted my reply on your other thread before seeing this one.

LOL I saw that and I replied as well. If the ATV project was a REAL and SERIOUS install, I wouldn't even use ANY of the parts shown save for the bottle. The ATV is just for laughs and curiosity!

Yes but you still need it to perform at its best to be any good at all.
I'd turn the bottle over if I were you, as that costs nothing.

I'll have to do so on the next fill because I already filled it up with nitrous.

Let's call it an opportunity to reinforce the fact that OTHER KITS ARE PURE CRAP!

Any improvements can be made at a later time... this kit cost me almost nothing except for the bottle and jets.

True it will give you the opportunity to prove how stupid ALL US nitrous companies are as they all fit dip tubes, whereas when possible (which exclude car systems because it's more practical to have the valve at the top), we have ALWAYS avoided them.