NITROUS OXIDE ( nos / n2o ) advice forum

Hi,

just a quick question about my set up ,im using a slick fit booster kit on a twin cylinder motorcycle and have added a t-piece at the end of the nitrous and fuel pipes at the carb intake runners to feed both cyclinders . is this ok? or should i have fitted a y-piece at the solenoid outlet and run two lines to each carb runner? ill try and add a picture so you can see what ive done!

many thanks, dave

Without pics, I'd have to vote using Y-blocks to make sure the nitrous divides evenly. A T-Piece will cause turbulence and can allow more nitrous to go one way instead of another.

Thanks for the reply,I kinda thought that might be the case.my computer won't post the pics .basically it 12 inches of 4mm from the sfbk solenoids to a t piece and 3inch each way to each carb runner.I'll get there in the end its really interesting stuff .many thanks.