I've done a search for M3's but I couldn't find anything useful, so apologies if this has already been asked...
I'm fitting a single point wet kit to my E36 Evo and I have a few questions, so here goes
1) Where is the best place to fit the nozzle?
GREEN - Just after the MAF in parallel with the MAF
PINK - Just after the MAF but angled into the pelum chamber
YELLOW - In the middle of the elbow pointing at the throttle bodies (I have a feeling cyl 1 & 6 might not get enough N2O though)
2) Are the jets the same for fuel and N20? I have a bag of mixed jets, they have BHP numbers on them, but no other markings.
3) What jets should I start with? *EDIT* I've just found out the numbers on the jets arn't equal to BHP and that you fit different values to N2O/Fuel to adjust the mixture. so what number jets should I start off with?
4) can I get a replacement sticker for my bottle from anywhere, I was going to paint it and reapply the original sticker as it's a bit tatty.