Hi Guys
As well as a couple of other cars I have an MR2 turbo...it runs no intercooler for one reason or another..
At present it has a red 0.7 and a green 0.5 jet on the old style aquamist pump...50/50 ethanol/H20 triggered at 6psi, this provides circa 350cc per min.
Engine is bone stock rev2, it runs 20psi boost on a GT3071R with a link G4 ECU on 880cc injectors at around 60% DC, present power is around 350bhp/350lbft
It has been mapped with the methanol/H20 and also runs 95 octane fuel..very happy with the amount of timing advance we could get from the motor with it setup like this, when we mapped the car I still had the small sidemount intercooler and temps with a single 0.7mm jet was fine and even on an ambient 25c day after 1 hour of repeated mapping runs on the motorway we never saw over 35c degrees
As mentioned the intercooler has now been removed and even with the addition of another 0.5mm injector temps are very high and have been recorded at 90c on my datalog, i hope to get this on video but for now i just have a still image
http://www.youtube.com/watch?v=s6OX4vBXBpA&feature=youtu.beI have recently ordered a devils own kit (only due to the fact that I couldnt get my hands on an awesome Highpower one
)and hope to inject pre turbo as well as using the present kit in its present location, I will update this thread with the findings on the datalog as i go, i am only recording temp just before the TB and I am only interested in reduction of inlet temps at this time.
I thought some of you guys might be interested to see what happens, any ideas as to how much extra H20 I will be able to inject?, will I be able to get down to 30c with H20 alone?