NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
Where WON LEAD the rest FOLLOW http://nitrous-advice.org/viewtopic.php?f=14&t=6341 |
Page 1 of 1 |
Author: | Noswizard [ Sat Nov 26, 2011 4:49 pm ] |
Post subject: | Where WON LEAD the rest FOLLOW |
Well those with a 'few' brains will follow and obviously, someone at Speedtech was smart enough to appreciate the benefits of our SPRV, on the valve we sent them for appraisal a few years ago, otherwise they wouldn't be offering this now; https://apps.facebook.com/payvment/prod ... fpb?ctref= |
Author: | Brett928S2 [ Sat Nov 26, 2011 6:41 pm ] |
Post subject: | Re: Where WON LEAD the rest FOLLOW |
Hi Trev Whats the piece of wire for ? dont they think it will work or do they think it will blow off ? The idea is an obvious copy of yours , but I dont think much of the design or implementation lol... All the best Brett |
Author: | Brett928S2 [ Sat Nov 26, 2011 6:49 pm ] |
Post subject: | Re: Where WON LEAD the rest FOLLOW |
Hi Trev I suppose you can think of it as a compliment in one way, although IF they had done their OWN research they would have designed it properly... All the best Brett |
Author: | Noswizard [ Sat Nov 26, 2011 6:50 pm ] |
Post subject: | Re: Where WON LEAD the rest FOLLOW |
BTW this is how it SHOULD be done; |
Author: | Noswizard [ Sat Nov 26, 2011 6:52 pm ] |
Post subject: | Re: Where WON LEAD the rest FOLLOW |
Most people usually take the easy route rather than go to the trouble of working out the best route, that's why so many people try to COPY rather than INVENT. |
Author: | mgbv8 [ Sat Nov 26, 2011 8:42 pm ] |
Post subject: | Re: Where WON LEAD the rest FOLLOW |
Noswizard wrote: Well those with a 'few' brains will follow and obviously, someone at Speedtech was smart enough to appreciate the benefits of our SPRV, on the valve we sent them for appraisal a few years ago, otherwise they wouldn't be offering this now; https://apps.facebook.com/payvment/prod ... fpb?ctref= Looks like a slightly modified jet washer safety valve to me. Price is about right though as Jet washer sprvs are about £20 odd. And a lot of them can be tweaked from 0-3500 psi with an allen key. Not sure how they would stand up to a nitrous weep and the freeze effect though?? |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |