NITROUS OXIDE ( nos / n2o ) advice forum http://nitrous-advice.org/ |
|
NEW - NEW - NEW - NEW - NEW http://nitrous-advice.org/viewtopic.php?f=14&t=5775 |
Page 2 of 2 |
Author: | QuickStudy [ Sat Jun 11, 2011 10:18 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Like the new Welcome banner |
Author: | Noswizard [ Sat Jun 11, 2011 11:00 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
LOTS MORE to come ASAP!!! |
Author: | Noswizard [ Wed Jun 15, 2011 12:02 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
As you can see we're making the improvements as we have time and as promised, so all is going well. What we need now is for as many of you guys as possible, to add some reviews of the products to make best use of that additional feature, that we lost when we made the previous site 'upgrade', so please feel free to make your opinions of whatever products you've purchased from us known. |
Author: | Brett928S2 [ Fri Jul 15, 2011 12:52 am ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Hi Trev I hope you have one sat on the back shelf with my name on it for when I come up within the next 3 weeks All the best Brett |
Author: | Noswizard [ Fri Jul 15, 2011 1:56 am ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Certainly do Brett. |
Author: | Noswizard [ Sat Jul 23, 2011 11:50 am ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Watch the link on the home page www.noswizard.com for Max V2 features list etc. |
Author: | Brett928S2 [ Sat Jul 23, 2011 1:24 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Noswizard wrote: Watch the link on the home page http://www.noswizard.com for Max V2 features list etc. Hi Trev I already have, but only about 200 times lol... I am REALLY looking forward to the Maxx V2 ... All the best Brett |
Author: | Boostinhard [ Thu Jul 28, 2011 11:52 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Noswizard wrote: Watch the link on the home page http://www.noswizard.com for Max V2 features list etc. Is this still there? I don't get a list of features on the home page? Are we getting any closer to an "offical" announcment? Sam |
Author: | Noswizard [ Fri Jul 29, 2011 11:58 am ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Slowly but surely Sam. The picture and brief intro was the first step and I'm still working on the full specification details as and when there's no more pressing matters to deal with. Every day we get a little closer to having it completed - I PROMISE to have it finished by this time next week. |
Author: | Noswizard [ Mon Aug 01, 2011 2:21 am ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Features list almost done, just a couple of minor details to add and a general check over and that should be that job done UNTIL WE ADD THE NEXT FEATURE/S!!!! Should be added to the website by Wednesday with a bit of luck. |
Author: | Boostinhard [ Sun Aug 07, 2011 11:23 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
How's it coming along trev? Sam |
Author: | Noswizard [ Sun Aug 07, 2011 11:36 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Just waiting for Ant to proof read the final job and it'll be added to the website and should be done Tuesday/Wednesday. |
Author: | Noswizard [ Wed Aug 10, 2011 11:40 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
At last the long awaited features list for the new Max V2 - still a few more to add but this should bridge the gap till we get it completed. In addition to the following features list many of the existing features have been improved to deliver even better results. Inputs Independent AFR input Independent Gear IP input 0-5V analogue input 0-100 % PWM input to drive the Max as a slave to an ECU for REVO applications Outputs 2 additional REVO outputs for multiple REVO applications 0-5V analogue output to interface with an ECU and/or a data logger Dual Mosfet solenoid outputs for higher load applications 6V 10 Amp REVO drive output Software features On-Screen push button calibration for; N2O pressure, fuel pressure, voltage, gear input, AFR and 0-5 V input Dynamic Variable Frequency for a wider PWM range and smoother power delivery(DVF) AFR Trim log Quick access push button memory change capability Hardware Features Additional protection from interference Additional heat sinks for higher load capability On-board electrical connectors instead of attached loom External USB connection for quick and easy programming |
Author: | Boostinhard [ Thu Aug 11, 2011 11:38 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Thanks for the list, sounds great! Sam |
Author: | Noswizard [ Fri Aug 12, 2011 10:21 am ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
A few more to come and then the WHOLE list (including those that exist from the Max V1), will be available on the website. We've had a hell of a busy past few months, so finding the time for anything other than dealing with customers has been very difficult. |
Author: | Brett928S2 [ Fri Aug 12, 2011 9:16 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
Hi All Got my Maxx Extreme Race/Revo V2 Today and its phenomenal, everything Trev has said above and more as expected... And all working perfectly of course Will add more to my Annual visit to WON thread later when i have had a bath All the best Brett |
Author: | Noswizard [ Fri Aug 19, 2011 9:13 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
At last!!!! http://www.noswizard.com/index.php/max- ... 0tilt80ka2 Now 'all' we've got to do is get the instructions updated. |
Author: | Noswizard [ Thu Sep 01, 2011 11:16 pm ] |
Post subject: | Re: NEW - NEW - NEW - NEW - NEW |
OK here's a more comprehensive features list which gives more details about the features themselves; http://www.noswizard.com/index.php/max- ... 0tilt80ka2 What I'd appreciate is ANY feedback about any of the features that aren't adequately described, so that I can concentrate my efforts on making those clearer, so all contributions to that effect would be very welcome. BTW as much as it's nice to get complements about any aspect of my business, I'd rather have criticisms as that makes me aware of any shortcomings I'm unlikely to be aware of, because if I was aware of them they wouldn't exist, so please feel free to post any criticisms you feel appropriate. PS. I've separated off the original last page of this thread as it took the thread off topic far too much and those posts can now be found here; viewtopic.php?f=8&t=6193&start=0 |
Page 2 of 2 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |